Difference between revisions of "XPSWMM Conversion TUFLOW Boundary Control File (TBC)"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
<li> Remove the reference to the 2d_bc points layer. This layer was removed from the model GeoPackage in the <u[[XPSWMM_Conversion_Export_SWMM_Pipe_Network_Data#Export_1D_EPA_SWMM_Pipe_Network_Data_from_XPSWMM |Export 1D EPA SWMM Pipe Network Data from XPSWMM]]</u> section.  
 
<li> Remove the reference to the 2d_bc points layer. This layer was removed from the model GeoPackage in the <u[[XPSWMM_Conversion_Export_SWMM_Pipe_Network_Data#Export_1D_EPA_SWMM_Pipe_Network_Data_from_XPSWMM |Export 1D EPA SWMM Pipe Network Data from XPSWMM]]</u> section.  
 
<li> The TBC should reference the 2D boundary condition layer and the 1D/2D connection layer. In this case, they are both included in the 2d_bc connections layer. <br>  
 
<li> The TBC should reference the 2D boundary condition layer and the 1D/2D connection layer. In this case, they are both included in the 2d_bc connections layer. <br>  
<font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>1D2D_Urban_001_2d_bc_L </tt></font> <font color="green"><tt> ! Reads in 2D boundaries and links 1D SWMM culverts to the 2D TUFLOW domain</tt></font><br>
+
<font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>1D2D_Urban_001_2d_bc_L </tt></font> <font color="green"><tt> ! Reads in 2D inflow/outflow boundaries and links 1D SWMM through embankment culverts to the 2D TUFLOW domain</tt></font><br>
 
<br>
 
<br>
 
'''<font color="red">Video</font>'''
 
'''<font color="red">Video</font>'''

Revision as of 10:59, 16 February 2024

TUFLOW Boundary Control File (TBC)

The TUFLOW Boundary Control File (TBC) contains information regarding the location of 2D boundary conditions and internal 1D/2D links within the model.

  1. In Windows File Explorer, navigate to the TUFLOW\model folder and open the TBC using a text editor (Notepad++ is recommended).
  2. Remove the reference to the 2d_bc points layer. This layer was removed from the model GeoPackage in the <uExport 1D EPA SWMM Pipe Network Data from XPSWMM section.
  3. The TBC should reference the 2D boundary condition layer and the 1D/2D connection layer. In this case, they are both included in the 2d_bc connections layer.
    Read GIS BC == 1D2D_Urban_001_2d_bc_L  ! Reads in 2D inflow/outflow boundaries and links 1D SWMM through embankment culverts to the 2D TUFLOW domain

    Video


Up
Go-up.png Back to XPSWMM to TUFLOW Conversion Page