Difference between revisions of "TUFLOW Message 2204"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node. |alt_msg=NA |type=E...")
 
Line 5: Line 5:
 
|message_desc=TUFLOW could not connect the HX cells to the ISIS unit. This may occur if the HX line is already connected to an ESTRY 1D channel
 
|message_desc=TUFLOW could not connect the HX cells to the ISIS unit. This may occur if the HX line is already connected to an ESTRY 1D channel
 
|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.
 
|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.
|discussion_page=* [[Talk:TUFLOW Message 2203|Discuss Message 2203]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_2202|Message 2203]]
 
|prelink=[[TUFLOW_Message_2202|Message 2203]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2205|Message 2205]]
 
|nextlink=[[TUFLOW_Message_2205|Message 2205]]
 
}}
 
}}

Revision as of 14:22, 6 July 2022

TUFLOW Message
ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.

Alternate Message
NA

Message Type
ERROR

Description
TUFLOW could not connect the HX cells to the ISIS unit. This may occur if the HX line is already connected to an ESTRY 1D channel

Suggestions
Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.


Up
Go-up.png 2xxx Messages