Difference between revisions of "TUFLOW Message 2067"
Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[WARNING]] | |type=[[WARNING]] | ||
− | |message_desc=Some/all Zpts from last Read MID Zpt command are outside the 2D grid. | + | |message_desc=Some/all Zpts from last Read MID Zpt command are outside the 2D grid. This will only occur if the number of rows and/or columns in model has changed from when zpt layer was created. For example by changing the grid dimensions with the .tgc command: <br> |
− | |suggestions= | + | <font color="green"><tt>Grid Size (N,M) == </tt></font> |
+ | |||
+ | When using row and column data (<font color="green"><tt>Read RowCol Zpts == </tt></font>), the GIS information isn't used by TUFLOW, the location of Zpt is determined from the TUFLOW row and column reference of the cell. This makes processing Zpts much much faster. However, if the grid dimensions have changed, it is an indication the the model has been significantly altered. If the dimensions have changed because the cell size and/or origin command have also been changed, it may be necessary to re-create and re-inspect Zpts. | ||
+ | |suggestions=Check that Zpts are in the correct, an easy way to do this is to import 2d_zpt check file and interpolate a DEM from it. | ||
|discussion_page=* [[Talk:TUFLOW Message 2067|Discuss Message 2067]] | |discussion_page=* [[Talk:TUFLOW Message 2067|Discuss Message 2067]] | ||
|link3='' | |link3='' |
Revision as of 16:07, 11 February 2011
TUFLOW Message
WARNING 2067 - Some/all Zpts from last Read MID Zpt command are outside the 2D grid.
Alternate Message
NA
Message Type
WARNING
Description
Some/all Zpts from last Read MID Zpt command are outside the 2D grid. This will only occur if the number of rows and/or columns in model has changed from when zpt layer was created. For example by changing the grid dimensions with the .tgc command:
Grid Size (N,M) ==
When using row and column data (Read RowCol Zpts == ), the GIS information isn't used by TUFLOW, the location of Zpt is determined from the TUFLOW row and column reference of the cell. This makes processing Zpts much much faster. However, if the grid dimensions have changed, it is an indication the the model has been significantly altered. If the dimensions have changed because the cell size and/or origin command have also been changed, it may be necessary to re-create and re-inspect Zpts.
Suggestions
Check that Zpts are in the correct, an easy way to do this is to import 2d_zpt check file and interpolate a DEM from it.
Up |
---|
2xxx Messages |