Difference between revisions of "TUFLOW Message 1101"
Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
|tuflow_message=ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found | |tuflow_message=ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found | ||
− | |alt_msg= | + | |alt_msg=ERROR 1101 - Less than the mandatory 10 1d_pit attributes found. |
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version). | |message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version). |
Revision as of 09:37, 23 September 2020
TUFLOW Message
ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found
Alternate Message
ERROR 1101 - Less than the mandatory 10 1d_pit attributes found.
Message Type
ERROR
Description
1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).
Suggestions
Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release.
Check that the 1d_nwk layer being read in via the 'Read GIS Network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
Up |
---|
1xxx Messages |