Difference between revisions of "TUFLOW Message 2562"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=The number of Auto Terminate cells monitored is zero.  
 
|message_desc=The number of Auto Terminate cells monitored is zero.  
|suggestions=Either set "<font color="blue"><tt>Set Auto Terminate</tt></font> <font color="red"><tt>==</tt></font> <tt>1</tt>", or use "<font color="blue"><tt>Read GIS Auto Terminate</tt></font> <font color="red"><tt>==</tt></font>" command to vary the monitoring location spatially.
+
|suggestions=Either set "<font color="blue"><tt>Set Auto Terminate</tt></font> <font color="red"><tt>==</tt></font> <tt>1</tt>" to include the entire grid, or use "<font color="blue"><tt>Read GIS Auto Terminate</tt></font> <font color="red"><tt>==</tt></font>" command to vary the monitoring location spatially.
 
|discussion_page=* [[Talk:TUFLOW Message 2562|Discuss Message 2562]]
 
|discussion_page=* [[Talk:TUFLOW Message 2562|Discuss Message 2562]]
 
|link3=''
 
|link3=''

Revision as of 14:10, 24 December 2020

TUFLOW Message
ERROR 2562 - Number of monitored is zero.

Alternate Message
NA

Message Type
ERROR

Description
The number of Auto Terminate cells monitored is zero.

Suggestions
Either set "Set Auto Terminate == 1" to include the entire grid, or use "Read GIS Auto Terminate ==" command to vary the monitoring location spatially.


Up
Go-up.png 2xxx Messages