Difference between revisions of "TUFLOW Message 2905"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[WARNING]]
 
|type=[[WARNING]]
 
|message_desc=If a value specified in the 2d_code input later is greater than 1, TUFLOW will set the value to 1. If the value is less than -1, TUFLOW will set the value to -1. The valid options for cell code are:<br>
 
|message_desc=If a value specified in the 2d_code input later is greater than 1, TUFLOW will set the value to 1. If the value is less than -1, TUFLOW will set the value to -1. The valid options for cell code are:<br>
 +
 
<li>Code -1, inactive cell but included in outputs (HPC and Classic only)   
 
<li>Code -1, inactive cell but included in outputs (HPC and Classic only)   
 
<li>Code 0, inactive cell   
 
<li>Code 0, inactive cell   
<li>Code 1, active cell  <br>
+
<li>Code 1, active cell   
 +
<br>
  
 
|suggestions=Review the attribute value of the 2d_code polygon.
 
|suggestions=Review the attribute value of the 2d_code polygon.
 +
<br>
  
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
}}
 
}}

Revision as of 20:09, 23 February 2024

TUFLOW Message
WARNING 2905 - Code value specified is greater than 1, using 1.

Alternate Message
WARNING 2905 - Code value specified is less than -1, using -1.

Message Type
WARNING

Description
If a value specified in the 2d_code input later is greater than 1, TUFLOW will set the value to 1. If the value is less than -1, TUFLOW will set the value to -1. The valid options for cell code are:

  • Code -1, inactive cell but included in outputs (HPC and Classic only)
  • Code 0, inactive cell
  • Code 1, active cell
    Suggestions
    Review the attribute value of the 2d_code polygon.
    Up
    Go-up.png 2xxx Messages