Difference between revisions of "1D Bridges"
Jump to navigation
Jump to search
Rohan.king (talk | contribs) (Created page with "<font size = 18>Page Under Construction</font> <br> <br> <br> =Introduction= <br> *Link to 2D section – this section explains 1D bridges only. *Advice on when you would mo...") |
Rohan.king (talk | contribs) m |
||
| Line 16: | Line 16: | ||
*Method A & Method B for bridges – refer to Bill’s post on 1.56 value | *Method A & Method B for bridges – refer to Bill’s post on 1.56 value | ||
| + | <br> | ||
| + | [[File:Small_bridge.jpg|border|600px]] <br> | ||
Revision as of 02:35, 30 January 2016
Page Under Construction
Introduction
- Link to 2D section – this section explains 1D bridges only.
- Advice on when you would model a 1D bridge versus a 2D bridge (read module 6).
- Examples on a XZ and HW bridge type – pictures & csv examples
- Information on the checks you can carry out
- Theory
- Loss types (piers Kp, blockage Kb)
- Guidance/reference on how to derive losses
- Make sure to include section on automation of pier losses?
- Method A & Method B for bridges – refer to Bill’s post on 1.56 value
Any further questions please email TUFLOW support: support@tuflow.com