TUFLOW Message 2308

From Tuflow
Revision as of 09:41, 8 May 2018 by ShuangGao (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2308 - Event <event name> not defined by "Define Event ==" command.

Alternate Message
NA

Message Type
ERROR

Description
The event specified when simulating the model is not defined in the .tef event file.

Suggestions
The event used for the simulation is either specified using the .tcf command: Model Events ==, or by using the –e switch when executing the model from a batch file, and may be verified within the .tlf log file. Note that the latter takes priority over the former. Commands relevant to this event have not been defined with a Define Event == command within the event file (.tef). An example of an event file is provided in Section 11.3.1 of the [https://www.tuflow.com/Downloads.aspx


Up
Go-up.png 2xxx Messages