TUFLOW Message 2044
Revision as of 15:14, 8 August 2010 by tuflow>Par (Created page with '{{TUFLOW_Message |tuflow_message=???? |message_desc=The ground level of the 2D cell (ZC level) is below the 1D bed level. 2D cells selected by 1D/2D (HX) interface lines must at...')
TUFLOW Message
????
Alternate Message
{{{alt_msg}}}
Message Type
{{{type}}}
Description
The ground level of the 2D cell (ZC level) is below the 1D bed level. 2D cells selected by 1D/2D (HX) interface lines must at or above the bed level of the 1D channel. This error usually occurs when the 1D/2D interface line (HX line) passes through a depression that is lower than the bed levels of the 1D cross-sections.
Suggestions
????
Up |
---|
{{{uplink}}} |