QGIS SWMM GeoPackage Create from SWMM inp

From Tuflow
Revision as of 11:35, 7 December 2023 by Emilie Nielsen (talk | contribs) (Created page with "== Introduction == This tool adds tables representing SWMM sections to an existing GeoPackage. The formatting works with the TUFLOW-SWMM tools for writing SWMM inp files. It i...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

This tool adds tables representing SWMM sections to an existing GeoPackage. The formatting works with the TUFLOW-SWMM tools for writing SWMM inp files. It is recommended to use this tool to create new SWMM sections to eliminate potential future errors when using the other TUFLOW-SWMM tools.

Usage

This tool can be found in the QGIS processing toolbox panel under 'TUFLOW > SWMM'. To open the Processing Toolbox Panel, navigate to 'Processing' in the menubar and select 'Toolbox'.

Open processing toolbox.png

Parameters

  1. GPKG filename modify: Select the ... button to bring up a dialogue and then navigate to the location of the GeoPackage to modify.
  2. CRS for GeoPackage layers: Select the CRS (Coordinate Reference System) of the GeoPackage by either the drop down menu, or by selecting 'Select CRS' CRS icon.png and using the CRS Selector.
  3. SWMM Sections to add: Select the ... button and tick on the SWMM sections to add to the GeoPackage.


File:.png

Example


Up
Go-up.png Back to TUFLOW QGIS Plugin Main Page