TUFLOW Message 2594

From Tuflow
Revision as of 17:40, 8 May 2024 by Ellis Symons (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2594 - For soil ID [n] soil type is not "CO" required for soil layers > 1 |alt_msg=NA |type=ERROR |message_desc=Soil layers that a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
WARNING 2594 - For soil ID [n] soil type is not "CO" required for soil layers > 1

Alternate Message
NA

Message Type
ERROR

Description
Soil layers that are not the top most layer must use the 'CO' type within the TSOILF.

Suggestions
Make sure any soil layers defined using "Set Soil Layer N == " or "Read GIS Soil Layer N == " or "Read GRID Soil Layer N == " (where N is a number with a value of 2 or more) are not referencing soil IDs that are not a 'CO' type.

There is a known bug in the 2023-03 release (pre 2023-03-AF build) that caused soil layers that had an 'Initial Moisture' parameter in the TSOILF greater or equal to the soil porosity to change the soil type to 'NONE' which could cause this error to trigger (search the TLF for "WARNING 2508" to confirm). Either upgrade to the 2023-03-AF build (or more recent) or check the initial moisture parameter in the TSOILF is less than the soil porosity value.


Up
Go-up.png 2xxx Messages