FM Tute M01 MI x1D Nodes

From Tuflow
Revision as of 22:07, 11 November 2016 by Rachel (talk | contribs) (→‎Method)
Jump to navigation Jump to search

    Introduction

    We will now create TUFLOW GIS layers to reference the nodes within the Flood Modeller model.
    These node layers are the primary way that TUFLOW references the Flood Modeller sections.

    Method

  1. Open the FloodModeller_Nodes.TAB layer from Module_Data\Module_01\mi folder.
  2. Save as 1d_x1d_FMT_M01_nodes_001.TAB within the FMT_tutorial\FMT_M01\TUFLOW\model\mi folder.
  3. Open the GIS layer 1d_x1d_FMT_M01_nodes_001.TAB within MapInfo.
  4. Interrogate one of the digitised points and inspect the attributes. Note that each point has a unique name which correlates to a RIVER, INTERPOLATE or REPLICATE unit within the Flood Modeller model. At junctions, both the upstream and downstream nodes must be digitised within this layer.
  5. FMT QGISx1D Nodes MI.PNG
  6. Save and export the file to MID/MIF format.

    Key Tip!

    The node IDs are case-sensitive as this is a requirement of Flood Modeller.


    You have now created the links to Flood Modeller for reading into TUFLOW. Return to the Flood Modeller Tutorial Model.