Difference between revisions of "TUFLOW Message 0002"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|message_desc=Could not configure simulation log path into dongle - reason unknown. | |message_desc=Could not configure simulation log path into dongle - reason unknown. | ||
This message should only be displayed if the -slp TUFLOW.exe option for storing the "Simulations Log Folder" on a SoftLok dongle fails. Note, the -slp option is not available for WIBU Codemeter dongles. | This message should only be displayed if the -slp TUFLOW.exe option for storing the "Simulations Log Folder" on a SoftLok dongle fails. Note, the -slp option is not available for WIBU Codemeter dongles. | ||
| − | |suggestions=Check the length of the path is less than 65 characters ([[ | + | |suggestions=Check the length of the path is less than 65 characters ([[TUFLOW_Message_0003|ERROR 0003]] should result if it isn't). Check the dongle is being recognised by TUFLOW by double clicking on a TUFLOW.exe. For more information see Table 5.2 in the 2010-10 TUFLOW Manual. |
|discussion_page=* [[Talk:TUFLOW Message 0002|Discuss Message 0002]] | |discussion_page=* [[Talk:TUFLOW Message 0002|Discuss Message 0002]] | ||
|link3='' | |link3='' | ||
Revision as of 14:45, 4 August 2011
TUFLOW Message
ERROR 0002 - Could not configure simulation log path into dongle - reason unknown.
Alternate Message
NA
Message Type
ERROR
Description
Could not configure simulation log path into dongle - reason unknown.
This message should only be displayed if the -slp TUFLOW.exe option for storing the "Simulations Log Folder" on a SoftLok dongle fails. Note, the -slp option is not available for WIBU Codemeter dongles.
Suggestions
Check the length of the path is less than 65 characters (ERROR 0003 should result if it isn't). Check the dongle is being recognised by TUFLOW by double clicking on a TUFLOW.exe. For more information see Table 5.2 in the 2010-10 TUFLOW Manual.
| Up |
|---|
 0xxx Messages
|