Difference between revisions of "TUFLOW Message 0116"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 5: | Line 5: | ||
|message_desc=First data pair for pit inlet curve (depth-flow) are not 0,0. The first values must be 0 (at depth 0) and 0 (flow is zero). Anything else is invalid, for example (0,0.1) would mean that at depth of zero a flow of 0.1 m<sup>3</sup>/s is generated, and mass is created! | |message_desc=First data pair for pit inlet curve (depth-flow) are not 0,0. The first values must be 0 (at depth 0) and 0 (flow is zero). Anything else is invalid, for example (0,0.1) would mean that at depth of zero a flow of 0.1 m<sup>3</sup>/s is generated, and mass is created! | ||
|suggestions=Ensure first values in inlet curve are 0,0 | |suggestions=Ensure first values in inlet curve are 0,0 | ||
| − | + | <br> | |
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_0115|Message 0115]] | |prelink=[[TUFLOW_Message_0115|Message 0115]] | ||
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | |uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_0117|Message 0117]] | |nextlink=[[TUFLOW_Message_0117|Message 0117]] | ||
}} | }} | ||
Revision as of 14:22, 1 July 2022
TUFLOW Message
ERROR 0116 - First pair of values for pit inlet depth-flow curve for Inlet Type ",a," are not 0,0.
Alternate Message
NA
Message Type
ERROR
Description
First data pair for pit inlet curve (depth-flow) are not 0,0. The first values must be 0 (at depth 0) and 0 (flow is zero). Anything else is invalid, for example (0,0.1) would mean that at depth of zero a flow of 0.1 m3/s is generated, and mass is created!
Suggestions
Ensure first values in inlet curve are 0,0
| Up |
|---|
 0xxx Messages
|