Difference between revisions of "TUFLOW Message 1009"

From Tuflow
Jump to navigation Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1009 - Incompatible H & Q boundaries specified for node |alt_msg=NA |type=ERROR |message_desc=???? |suggestions=???? |discussion_page=...')
 
 
(2 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=????
+
|message_desc=Both water level (H) and flow (Q) type objects have been specified at 1D node.  Both of these boundary types can not be specified at a single node.
|suggestions=????
+
|suggestions=Seperate or remove boundary conditions.
|discussion_page=* [[Talk:TUFLOW Message 1009|Discuss Message 1009]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_1008|Message 1008]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1010|Message 1010]]
 
 
}}
 
}}

Latest revision as of 13:37, 22 December 2022

TUFLOW Message
ERROR 1009 - Incompatible H & Q boundaries specified for node

Alternate Message
NA

Message Type
ERROR

Description
Both water level (H) and flow (Q) type objects have been specified at 1D node. Both of these boundary types can not be specified at a single node.

Suggestions
Seperate or remove boundary conditions.


Up
Go-up.png 1xxx Messages