Difference between revisions of "TUFLOW Message 1054"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=The attribute type is not valid for the object type.  For example a 1d_bc should be either a point object or a region object, it is not valid on a line object.
 
|message_desc=The attribute type is not valid for the object type.  For example a 1d_bc should be either a point object or a region object, it is not valid on a line object.
 
|suggestions=Convert the GIS object to a valid type.
 
|suggestions=Convert the GIS object to a valid type.
|discussion_page=* [[Talk:TUFLOW Message 1054|Discuss Message 1054]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_1053|Message 1053]]
 
|prelink=[[TUFLOW_Message_1053|Message 1053]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|nextlink=[[TUFLOW_Message_1055|Message 1055]]
 
|nextlink=[[TUFLOW_Message_1055|Message 1055]]
 
}}
 
}}

Revision as of 15:58, 1 July 2022

TUFLOW Message
ERROR 1054 - This type can only be assigned to a line object. Type: ",a,

Alternate Message
ERROR 1054 - This type can only be assigned to a point object. Type: ",a,

Message Type
ERROR

Description
The attribute type is not valid for the object type. For example a 1d_bc should be either a point object or a region object, it is not valid on a line object.

Suggestions
Convert the GIS object to a valid type.


Up
Go-up.png 1xxx Messages