Difference between revisions of "TUFLOW Message 1066"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=For an XZ type cross-section the P values define the position of the XZ point.  This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3).  P values must be entered as 1, 2 or 3.  For more details see Section 4.6.6.4 Position Flag of TUFLOW manual (2010 version).
+
|message_desc=For an XZ type cross-section the P values define the position of the XZ point.  This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3).  P values must be entered as 1, 2 or 3.  For more details see Section '''4.6.6.4 Position Flag''' of TUFLOW manual (2010 version).
 
|suggestions=If using P values, these must be either 1, 2 or 3.
 
|suggestions=If using P values, these must be either 1, 2 or 3.
 
|discussion_page=* [[Talk:TUFLOW Message 1066|Discuss Message 1066]]
 
|discussion_page=* [[Talk:TUFLOW Message 1066|Discuss Message 1066]]

Revision as of 15:45, 31 January 2011

TUFLOW Message
ERROR 1066 - Invalid P value(s) specified for cross-section ",a," in ",a,

Alternate Message
NA

Message Type
ERROR

Description
For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details see Section 4.6.6.4 Position Flag of TUFLOW manual (2010 version).

Suggestions
If using P values, these must be either 1, 2 or 3.


Up
Go-up.png 1xxx Messages