Difference between revisions of "TUFLOW Message 1103"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, the additional GIS attributes as per Table 4.15 1D Model Network (1d_nwke) OPTIONAL Attribute Descriptions in the TUFLOW manual (2010) version.
 
|message_desc=If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, the additional GIS attributes as per Table 4.15 1D Model Network (1d_nwke) OPTIONAL Attribute Descriptions in the TUFLOW manual (2010) version.
|suggestions=????
+
|suggestions=Ensure GIS attributes for a 1d_nwke layer match with the empty file (1d_nwke_empty) as written by TUFLOW.
 
|discussion_page=* [[Talk:TUFLOW Message 1103|Discuss Message 1103]]
 
|discussion_page=* [[Talk:TUFLOW Message 1103|Discuss Message 1103]]
 
|link3=''
 
|link3=''

Revision as of 16:12, 31 January 2011

TUFLOW Message
ERROR 1103 - Must have ten extra attributes appended to 1d_nwk layer to use the weir over the top option.

Alternate Message
NA

Message Type
ERROR

Description
If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, the additional GIS attributes as per Table 4.15 1D Model Network (1d_nwke) OPTIONAL Attribute Descriptions in the TUFLOW manual (2010) version.

Suggestions
Ensure GIS attributes for a 1d_nwke layer match with the empty file (1d_nwke_empty) as written by TUFLOW.


Up
Go-up.png 1xxx Messages