Difference between revisions of "TUFLOW Message 1123"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=Multiple cross-sections with the same priority have been found for channel.  Mid channel cross-sections have higher priotity than end cross-sections and will prevail.  But if multiple mid channel cross-sections are found TUFLOW will give Error 1123.
+
|message_desc=Multiple cross-sections with the same priority have been found for channel.  Mid channel cross-sections have higher priority than end cross-sections and will prevail.  But if multiple mid channel cross-sections are found TUFLOW will give Error 1123.
|suggestions=Check channel and cross-section configuration, remove unwanted cross-section.
+
|suggestions=Check channel and cross-section configuration, remove unwanted cross-section.<br>
 +
If using end cross-sections ensure that the end of the 1d_nwk layer is snapped to a vertex on the cross-section.  If this is not the case the cross-section may be treated as a mid cross-section.
 
|discussion_page=* [[Talk:TUFLOW Message 1123|Discuss Message 1123]]
 
|discussion_page=* [[Talk:TUFLOW Message 1123|Discuss Message 1123]]
 
|link3=''
 
|link3=''

Revision as of 10:03, 2 September 2015

TUFLOW Message
ERROR 1123 - More than one cross-section line of same priority for channel

Alternate Message
NA

Message Type
ERROR

Description
Multiple cross-sections with the same priority have been found for channel. Mid channel cross-sections have higher priority than end cross-sections and will prevail. But if multiple mid channel cross-sections are found TUFLOW will give Error 1123.

Suggestions
Check channel and cross-section configuration, remove unwanted cross-section.
If using end cross-sections ensure that the end of the 1d_nwk layer is snapped to a vertex on the cross-section. If this is not the case the cross-section may be treated as a mid cross-section.


Up
Go-up.png 1xxx Messages