Difference between revisions of "TUFLOW Message 1154"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=A downstream end cross-section is specified, but no upstream end cross-section is specified. This may result in a 0 gradient channel. | |message_desc=A downstream end cross-section is specified, but no upstream end cross-section is specified. This may result in a 0 gradient channel. | ||
|suggestions=Specify a upstream end cross-section, or ensure that inverts are appropriate if using only a downstream end cross-section. | |suggestions=Specify a upstream end cross-section, or ensure that inverts are appropriate if using only a downstream end cross-section. | ||
| − | + | ||
| − | |||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 15:30, 22 December 2022
TUFLOW Message
CHECK 1154 - For channel ",a,", no upstream end cross-section specified (using downstream end cross-section).
Alternate Message
NA
Message Type
CHECK
Description
A downstream end cross-section is specified, but no upstream end cross-section is specified. This may result in a 0 gradient channel.
Suggestions
Specify a upstream end cross-section, or ensure that inverts are appropriate if using only a downstream end cross-section.
| Up |
|---|
 1xxx Messages
|