Difference between revisions of "TUFLOW Message 1154"

From Tuflow
Jump to navigation Jump to search
 
Line 6: Line 6:
 
|suggestions=Specify a upstream end cross-section, or ensure that inverts are appropriate if using only a downstream end cross-section.
 
|suggestions=Specify a upstream end cross-section, or ensure that inverts are appropriate if using only a downstream end cross-section.
  
|prelink=[[TUFLOW_Message_1153|Message 1153]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1156|Message 1156]]
 
 
}}
 
}}

Latest revision as of 15:30, 22 December 2022

TUFLOW Message
CHECK 1154 - For channel ",a,", no upstream end cross-section specified (using downstream end cross-section).

Alternate Message
NA

Message Type
CHECK

Description
A downstream end cross-section is specified, but no upstream end cross-section is specified. This may result in a 0 gradient channel.

Suggestions
Specify a upstream end cross-section, or ensure that inverts are appropriate if using only a downstream end cross-section.


Up
Go-up.png 1xxx Messages