TUFLOW Message 1154

From Tuflow
Revision as of 14:44, 1 February 2011 by tuflow>Par
Jump to navigation Jump to search

TUFLOW Message
CHECK 1154 - For channel ",a,", no upstream end cross-section specified (using downstream end cross-section).

Alternate Message
NA

Message Type
CHECK

Description
A downstream end cross-section is specified, but no upstream end cross-section is specified. This may result in a 0 gradient channel.

Suggestions
Specify a upstream end cross-section, or ensure that inverts are appropriate if using only a downstream end cross-section.


Up
Go-up.png 1xxx Messages