Difference between revisions of "TUFLOW Message 1157"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored.
 
|message_desc=A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored.
 
|suggestions=Check that the cross-section width in the .csv file for the weir is appropriate.
 
|suggestions=Check that the cross-section width in the .csv file for the weir is appropriate.
|discussion_page=* [[Talk:TUFLOW Message 1157|Discuss Message 1157]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_1156|Message 1156]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1158|Message 1158]]
 
 
}}
 
}}

Latest revision as of 15:31, 22 December 2022

TUFLOW Message
CHECK 1157 - Weir cross-section found (1d_nwk width ignored)

Alternate Message
NA

Message Type
CHECK

Description
A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored.

Suggestions
Check that the cross-section width in the .csv file for the weir is appropriate.


Up
Go-up.png 1xxx Messages