Difference between revisions of "TUFLOW Message 1178"
Melissa1987 (talk | contribs) |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
|tuflow_message=ERROR 1178 - Reading channel network data. Check 1d_nwk layer has correct attributes. | |tuflow_message=ERROR 1178 - Reading channel network data. Check 1d_nwk layer has correct attributes. | ||
| − | |alt_msg= | + | |alt_msg=ERROR 1178 - Reading 1D network layer. Check 1d_nwk layer has correct attributes. |
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command. | |message_desc=An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command. | ||
Revision as of 10:39, 9 December 2022
TUFLOW Message
ERROR 1178 - Reading channel network data. Check 1d_nwk layer has correct attributes.
Alternate Message
ERROR 1178 - Reading 1D network layer. Check 1d_nwk layer has correct attributes.
Message Type
ERROR
Description
An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command.
Suggestions
Aways use an empty 1d_nwk template file as the GIS entry for 1d_nwk inputs. DO NOT create empty 1d_nwk template files mannually yourself. Use either TCF command, Write Empty MI Files == or Write Empty SHP Files == to create these template files. Also, ensure the layer has the correct attributes and ensure that the Read GIS Network == command is only used for network data, not 1D boundary or table links.
| Up |
|---|
 1xxx Messages
|