Difference between revisions of "TUFLOW Message 1200"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 5: | Line 5: | ||
|message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels. | |message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels. | ||
|suggestions=Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually. | |suggestions=Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1194|Message 1194]] | |prelink=[[TUFLOW_Message_1194|Message 1194]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1201|Message 1201]] | |nextlink=[[TUFLOW_Message_1201|Message 1201]] | ||
}} | }} | ||
Revision as of 13:59, 5 July 2022
TUFLOW Message
CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels.
Alternate Message
NA
Message Type
CHECK
Description
Node at start of connector can only be used for setting up channel inverts and pit channels.
Suggestions
Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.
| Up |
|---|
 1xxx Messages
|