TUFLOW Message 1207

From Tuflow
Revision as of 10:38, 23 September 2014 by Steph.dufour (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
ERROR 1207 - Default manhole type for digitised manholes with blank Type must be C, J or R.

Alternate Message
N/A

Message Type
ERROR

Description
For manually specified manholes, the manhole type has been left blank and the default setting using the command Manhole Default Type == is set to CR or CJR.

Suggestions
Manhole Default Type == must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default.


Up
Go-up.png 1xxx Messages