Difference between revisions of "TUFLOW Message 1299"
Melissa1987 (talk | contribs) |
Melissa1987 (talk | contribs) |
||
| Line 6: | Line 6: | ||
|suggestions=Choose a 1D timestep that is a multiple of all 2D domain timesteps. | |suggestions=Choose a 1D timestep that is a multiple of all 2D domain timesteps. | ||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:25, 23 December 2022
TUFLOW Message
ERROR 1299 - 1D timestep is not a multiple of timestep for Domain <domain number>
Alternate Message
NA
Message Type
ERROR
Description
The 1D timestep is not a multiple the the 2D timesteps for one of the domains. If using a 1D timestep smaller than 2D timestep, for each 2D domain the 2D timestep needs to be divisible by the 1D timestep. For example if a multiple 2D domain model as a 20m grid with a 5 second 2D timestep and a second 5m 2D domain with a 1.25 second timestep a 1D timestep of 1 second would cause this error to be returned. Whilst the 1 second timestep is a multiple of the primary 5 second timestep, it is not a multiple of the 1.25 second timestep.
Suggestions
Choose a 1D timestep that is a multiple of all 2D domain timesteps.
| Up |
|---|
 1xxx Messages
|