Difference between revisions of "TUFLOW Message 2013"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=2D cell has a zero or negative bed resistance coefficient (eg. a negative Manning's n).  Note: TUFLOW Builds prior to August 2000 used default values of C=50, M=40 or n=0.025.
 
|message_desc=2D cell has a zero or negative bed resistance coefficient (eg. a negative Manning's n).  Note: TUFLOW Builds prior to August 2000 used default values of C=50, M=40 or n=0.025.
 
|suggestions=Specify a positive bed resistance coefficient.
 
|suggestions=Specify a positive bed resistance coefficient.
|discussion_page=* [[Talk:TUFLOW Message 2013|Discuss Message 2013]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_2012|Message 2012]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2014|Message 2014]]
 
 
}}
 
}}

Latest revision as of 10:55, 23 December 2022

TUFLOW Message
ERROR 2013 - Zero or negative bed resistance coefficient found at

Alternate Message
NA

Message Type
ERROR

Description
2D cell has a zero or negative bed resistance coefficient (eg. a negative Manning's n). Note: TUFLOW Builds prior to August 2000 used default values of C=50, M=40 or n=0.025.

Suggestions
Specify a positive bed resistance coefficient.


Up
Go-up.png 2xxx Messages