Difference between revisions of "TUFLOW Message 2014"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=No active 2D cells within Source over Area (SA) inflow polygon. | |message_desc=No active 2D cells within Source over Area (SA) inflow polygon. | ||
| − | |suggestions= | + | |suggestions=Source-Area polygon in outside of active model code. Check SA polygon is in the correct location, active model area (2D code) may need to be extended. |
|discussion_page=* [[Talk:TUFLOW Message 2014|Discuss Message 2014]] | |discussion_page=* [[Talk:TUFLOW Message 2014|Discuss Message 2014]] | ||
|link3='' | |link3='' | ||
Revision as of 12:30, 4 February 2011
TUFLOW Message
ERROR 2014 - No active cells within SA inflow polygon.
Alternate Message
NA
Message Type
ERROR
Description
No active 2D cells within Source over Area (SA) inflow polygon.
Suggestions
Source-Area polygon in outside of active model code. Check SA polygon is in the correct location, active model area (2D code) may need to be extended.
| Up |
|---|
 2xxx Messages
|