Difference between revisions of "TUFLOW Message 2022"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=Can only use <font color="blue"><tt>Oblique Boundary Alignment </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>NEAREST TO LINE </tt></font> for 2D BC if <font color="blue"><tt>Oblique Boundary Method </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt> ON</tt></font>.<br>
 
|message_desc=Can only use <font color="blue"><tt>Oblique Boundary Alignment </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>NEAREST TO LINE </tt></font> for 2D BC if <font color="blue"><tt>Oblique Boundary Method </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt> ON</tt></font>.<br>
 
As of Build 2006-06-AA, this command is considered redundant (other than for backward compatibility), as the Method C or D (Boundary Cell Selection and Line Cell Selection) ensures that the same cells are selected along both HX lines and Z lines.
 
As of Build 2006-06-AA, this command is considered redundant (other than for backward compatibility), as the Method C or D (Boundary Cell Selection and Line Cell Selection) ensures that the same cells are selected along both HX lines and Z lines.
|suggestions=If using a build of TUFLOW prior to 2006-06-AA and using the <font color="green"><tt>Oblique Boundary Alignment == NEAREST TO LINE </tt></font> command, ensure that the <font color="green"><tt>Oblique Boundary Method == ON</tt></font> command is also used.
+
|suggestions=If using a build of TUFLOW prior to 2006-06-AA and using the <font color="blue"><tt>Oblique Boundary Alignment </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>NEAREST TO LINE </tt></font> command, ensure that the <font color="blue"><tt>Oblique Boundary Method </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt> ON</tt></font> command is also used.
  
 
|discussion_page=* [[Talk:TUFLOW Message 2022|Discuss Message 2022]]
 
|discussion_page=* [[Talk:TUFLOW Message 2022|Discuss Message 2022]]

Revision as of 09:12, 24 June 2022

TUFLOW Message
ERROR 2022 - Can only use nearest to line oblique boundary alignment for 2D BC if "Oblique Boundary Method == ON"

Alternate Message
NA

Message Type
ERROR

Description
Can only use Oblique Boundary Alignment == NEAREST TO LINE for 2D BC if Oblique Boundary Method == ON.
As of Build 2006-06-AA, this command is considered redundant (other than for backward compatibility), as the Method C or D (Boundary Cell Selection and Line Cell Selection) ensures that the same cells are selected along both HX lines and Z lines.

Suggestions
If using a build of TUFLOW prior to 2006-06-AA and using the Oblique Boundary Alignment == NEAREST TO LINE command, ensure that the Oblique Boundary Method == ON command is also used.


Up
Go-up.png 2xxx Messages