Difference between revisions of "TUFLOW Message 2023"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Exceeded maximum allowable connection (CN and SC) objects in a single 2d_bc layer.  Work around is to split the 2d_bc layer into two or more layers.  The limit can be increased for future TUFLOW releases upon request.
 
|message_desc=Exceeded maximum allowable connection (CN and SC) objects in a single 2d_bc layer.  Work around is to split the 2d_bc layer into two or more layers.  The limit can be increased for future TUFLOW releases upon request.
|suggestions=Split 2d_bc layer or contact <font color="blue">support@tuflow.com</font> to request an increase maximum allowable connections.
+
|suggestions=Split 2d_bc layer or contact <u><font color="blue">support@tuflow.com</font></u> to request an increase maximum allowable connections.
 
|discussion_page=* [[Talk:TUFLOW Message 2023|Discuss Message 2023]]
 
|discussion_page=* [[Talk:TUFLOW Message 2023|Discuss Message 2023]]
 
|link3=''
 
|link3=''

Revision as of 09:11, 4 July 2022

TUFLOW Message
ERROR 2023 - Exceeded maximum allowable connection (CN and SC) objects in a single 2d_bc layer.

Alternate Message
NA

Message Type
ERROR

Description
Exceeded maximum allowable connection (CN and SC) objects in a single 2d_bc layer. Work around is to split the 2d_bc layer into two or more layers. The limit can be increased for future TUFLOW releases upon request.

Suggestions
Split 2d_bc layer or contact support@tuflow.com to request an increase maximum allowable connections.


Up
Go-up.png 2xxx Messages