Difference between revisions of "TUFLOW Message 2035"

From Tuflow
Jump to navigation Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=???? |message_desc=Trying to apply a flow or velocity (Q or V) boundary to a 2D cell already assigned a link or a water level (H) or source flow ...')
 
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=????
+
|tuflow_message=ERROR 2035 - Trying to apply a Q boundary to a 2D cell already assigned a link or a H or S boundary.
 +
|alt_msg=NA
 +
|type=[[ERROR]]
 
|message_desc=Trying to apply a flow or velocity (Q or V) boundary to a 2D cell already assigned a link or a water level (H) or source flow (S) boundary.
 
|message_desc=Trying to apply a flow or velocity (Q or V) boundary to a 2D cell already assigned a link or a water level (H) or source flow (S) boundary.
 
|suggestions=????
 
|suggestions=????
Line 7: Line 9:
 
|link4=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_2034|Message 2034]]
 
|prelink=[[TUFLOW_Message_2034|Message 2034]]
 +
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2036|Message 2036]]
 
|nextlink=[[TUFLOW_Message_2036|Message 2036]]
 
}}
 
}}

Revision as of 11:39, 1 October 2010

TUFLOW Message
ERROR 2035 - Trying to apply a Q boundary to a 2D cell already assigned a link or a H or S boundary.

Alternate Message
NA

Message Type
ERROR

Description
Trying to apply a flow or velocity (Q or V) boundary to a 2D cell already assigned a link or a water level (H) or source flow (S) boundary.

Suggestions
????


Up
Go-up.png 2xxx Messages