Difference between revisions of "TUFLOW Message 2063"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=Single connection (CN) to 1D Node must have a weighting factor (f attribute in 2d_bc layer) of one (1.0).  As of Build 2004-07-AC, a zero weighting factor is interpreted as a value of one (1.0).
 
|message_desc=Single connection (CN) to 1D Node must have a weighting factor (f attribute in 2d_bc layer) of one (1.0).  As of Build 2004-07-AC, a zero weighting factor is interpreted as a value of one (1.0).
 
|suggestions=If using a single CN connection to a 1D node, ensure weighting factor (f) of 1.0 is used.
 
|suggestions=If using a single CN connection to a 1D node, ensure weighting factor (f) of 1.0 is used.
|discussion_page=* [[Talk:TUFLOW Message 2063|Discuss Message 2063]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_2062|Message 2062]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2064|Message 2064]]
 
 
}}
 
}}

Latest revision as of 11:54, 23 December 2022

TUFLOW Message
ERROR 2063 - Single CN connection to 1D Node must have a weighting factor (f) of 1.0.

Alternate Message
NA

Message Type
ERROR

Description
Single connection (CN) to 1D Node must have a weighting factor (f attribute in 2d_bc layer) of one (1.0). As of Build 2004-07-AC, a zero weighting factor is interpreted as a value of one (1.0).

Suggestions
If using a single CN connection to a 1D node, ensure weighting factor (f) of 1.0 is used.


Up
Go-up.png 2xxx Messages