Difference between revisions of "TUFLOW Message 2077"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=CHECK 2077 - Beginning of 3D TIN breakline is dangling. <br> CHECK 2077 - Beginning of 3D line is dangling. | |alt_msg=CHECK 2077 - Beginning of 3D TIN breakline is dangling. <br> CHECK 2077 - Beginning of 3D line is dangling. | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc=Beginning of 3D breakline is dangling. | + | |message_desc=Beginning of 3D breakline is dangling. HX breakline does not have an elevation point at the start of the line, nearest point to the end of the line is used. |
| − | |suggestions= | + | |suggestions=Check elevation at start of HX breakline, if none specified closest elevation point is used. |
|discussion_page=* [[Talk:TUFLOW Message 2077|Discuss Message 2077]] | |discussion_page=* [[Talk:TUFLOW Message 2077|Discuss Message 2077]] | ||
|link3='' | |link3='' | ||
Revision as of 19:27, 14 February 2011
TUFLOW Message
CHECK 2077 - Beginning of 3D HX breakline is dangling.
Alternate Message
CHECK 2077 - Beginning of 3D TIN breakline is dangling.
CHECK 2077 - Beginning of 3D line is dangling.
Message Type
CHECK
Description
Beginning of 3D breakline is dangling. HX breakline does not have an elevation point at the start of the line, nearest point to the end of the line is used.
Suggestions
Check elevation at start of HX breakline, if none specified closest elevation point is used.
| Up |
|---|
 2xxx Messages
|