TUFLOW Message 2077

From Tuflow
Revision as of 19:27, 14 February 2011 by tuflow>Par
Jump to navigation Jump to search

TUFLOW Message
CHECK 2077 - Beginning of 3D HX breakline is dangling.

Alternate Message
CHECK 2077 - Beginning of 3D TIN breakline is dangling.
CHECK 2077 - Beginning of 3D line is dangling.

Message Type
CHECK

Description
Beginning of 3D breakline is dangling. HX breakline does not have an elevation point at the start of the line, nearest point to the end of the line is used.

Suggestions
Check elevation at start of HX breakline, if none specified closest elevation point is used.


Up
Go-up.png 2xxx Messages