Difference between revisions of "TUFLOW Message 2124"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 6: Line 6:
 
(previously Topo_ID).
 
(previously Topo_ID).
 
|suggestions=Review pit to see if connection to the 2D model is intended, if so specify a valid connection type in the Conn_2D attribute.
 
|suggestions=Review pit to see if connection to the 2D model is intended, if so specify a valid connection type in the Conn_2D attribute.
|discussion_page=* [[Talk:TUFLOW Message 2124|Discuss Message 2124]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_2123|Message 2123]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2125|Message 2125]]
+
 
 
}}
 
}}

Latest revision as of 15:00, 2 February 2023

TUFLOW Message
WARNING 2124 - No 2D connection specified for pit or node.

Alternate Message
NA

Message Type
WARNING

Description
No 2D connection specified for pit. Usually indicates that the SX has been omitted or typed incorectly in the 1d_nwk GIS attribute Conn_2D (previously Topo_ID).

Suggestions
Review pit to see if connection to the 2D model is intended, if so specify a valid connection type in the Conn_2D attribute.


Up
Go-up.png 2xxx Messages