Difference between revisions of "TUFLOW Message 2140"

From Tuflow
Jump to navigation Jump to search
 
Line 10: Line 10:
 
* Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)
 
* Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)
  
|prelink=[[TUFLOW_Message_2139|Message 2139]]
+
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2141|Message 2141]]
+
 
 
}}
 
}}

Latest revision as of 13:39, 7 February 2023

TUFLOW Message
ERROR 2140 - Reading following line in control file.

Alternate Message
NA

Message Type
ERROR

Description
An error occurred reading the following line in the control file.

Suggestions
Check the line is a valid TUFLOW command for the version of TUFLOW that you are running. Common mistake are:

  • Omitting the double equals (Set IWL = 0.6 not Set IWL == 0.6)
  • Using the Read GIS syntax for versions of TUFLOW prior to 2010 (use Read MI instead).
  • Using the Read RowCol syntax for versions of TUFLOW prior to 2010 (use Read MID instead).
  • Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)


Up
Go-up.png 2xxx Messages