Difference between revisions of "TUFLOW Message 2140"

Latest revision as of 13:39, 7 February 2023

TUFLOW Message
ERROR 2140 - Reading following line in control file.

Alternate Message
NA

Message Type
ERROR

Description
An error occurred reading the following line in the control file.

Suggestions
Check the line is a valid TUFLOW command for the version of TUFLOW that you are running. Common mistake are:

Omitting the double equals (Set IWL = 0.6 not Set IWL == 0.6)
Using the Read GIS syntax for versions of TUFLOW prior to 2010 (use Read MI instead).
Using the Read RowCol syntax for versions of TUFLOW prior to 2010 (use Read MID instead).
Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)

Up
2xxx Messages

@@ Line 4: / Line 4: @@
 |type=[[ERROR]]
 |message_desc=An error occurred reading the following line in the control file.
-|suggestions=????
+|suggestions=Check the line is a valid TUFLOW command for the version of TUFLOW that you are running. Common mistake are:<br>
-|discussion_page=* [[Talk:TUFLOW Message 2140|Discuss Message 2140]]
+* Omitting the double equals (<font color="blue"><tt>Set IWL </tt></font> <font color="red"><tt>=</tt></font><tt> 0.6</tt> not <font color="blue"><tt>Set IWL </tt></font> <font color="red"><tt>==</tt></font><tt> 0.6</tt>)
-|link3=''
+* Using the <font color="blue"><tt>Read GIS </tt></font> syntax for versions of TUFLOW prior to 2010 (use <font color="blue"><tt>Read MI </tt></font> instead).
-|link4=''
+* Using the <font color="blue"><tt>Read RowCol </tt></font> syntax for versions of TUFLOW prior to 2010 (use <font color="blue"><tt>Read MID </tt></font> instead).
-|prelink=[[TUFLOW_Message_2139|Message 2139]]
+* Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)
 |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
-|nextlink=[[TUFLOW_Message_2141|Message 2141]]
 }}