Difference between revisions of "TUFLOW Message 2302"
Jump to navigation
Jump to search
Steph.dufour (talk | contribs) |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=WARNING 2302 - | + | |tuflow_message=WARNING 2302 - Green Ampt solution may not have converged. |
|alt_msg=NA | |alt_msg=NA | ||
|type=[[WARNING]] | |type=[[WARNING]] | ||
|message_desc=The maximum number of iterations of the Green Ampt solution have been exceeded. | |message_desc=The maximum number of iterations of the Green Ampt solution have been exceeded. | ||
| − | |suggestions= | + | |suggestions=The number of iterations of the Green-Ampt infiltration convergence test have been exceeded. The number of iterations can be changed with the <tt>GA Maximum Iterations == </tt> command. The <tt>GA Convergence Value == </tt> command is used to set the convergence tolerance. Refer to the TUFLOW manual for more guidance on these commands. |
|discussion_page=* [[Talk:TUFLOW Message 2302|Discuss Message 2302]] | |discussion_page=* [[Talk:TUFLOW Message 2302|Discuss Message 2302]] | ||
|link3='' | |link3='' | ||
Revision as of 20:35, 18 June 2015
TUFLOW Message
WARNING 2302 - Green Ampt solution may not have converged.
Alternate Message
NA
Message Type
WARNING
Description
The maximum number of iterations of the Green Ampt solution have been exceeded.
Suggestions
The number of iterations of the Green-Ampt infiltration convergence test have been exceeded. The number of iterations can be changed with the GA Maximum Iterations == command. The GA Convergence Value == command is used to set the convergence tolerance. Refer to the TUFLOW manual for more guidance on these commands.
| Up |
|---|
 2xxx Messages
|