Difference between revisions of "TUFLOW Message 2377"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 5: | Line 5: | ||
|message_desc=This command was made redundant as of Build 2009-05-AL and was replaced by the ability to apply wind stresses over time using “WT” 2D boundary conditions. | |message_desc=This command was made redundant as of Build 2009-05-AL and was replaced by the ability to apply wind stresses over time using “WT” 2D boundary conditions. | ||
|suggestions=Use "WT" boundaries in a 2d_bc layer. | |suggestions=Use "WT" boundaries in a 2d_bc layer. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_2376|Message 2376]] | |prelink=[[TUFLOW_Message_2376|Message 2376]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2380|Message 2380]] | |nextlink=[[TUFLOW_Message_2380|Message 2380]] | ||
}} | }} | ||
Revision as of 16:06, 6 July 2022
TUFLOW Message
ERROR 2377 - Apply Wind Stresses command is redundant as of Build 2009-05-AL. Please refer to manual.
Alternate Message
NA
Message Type
ERROR
Description
This command was made redundant as of Build 2009-05-AL and was replaced by the ability to apply wind stresses over time using “WT” 2D boundary conditions.
Suggestions
Use "WT" boundaries in a 2d_bc layer.
| Up |
|---|
 2xxx Messages
|