Difference between revisions of "TUFLOW Message 2429"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=TUFLOW was unable to write data to the output .xmdf file.  The most likely cause for this is that there is insufficient disk space.
 
|message_desc=TUFLOW was unable to write data to the output .xmdf file.  The most likely cause for this is that there is insufficient disk space.
 
|suggestions=Check that the output drive has space available.<br>
 
|suggestions=Check that the output drive has space available.<br>
Check that the file system in use support the file size. [http://www.tuflow.com/forum/index.php?/topic/896-error-2429-check-disk-space/ See this forum post for more information.]<br>
+
Check that the file system in use support the file size. For example, FAT32 file system has a maximum file size limit of 4GB, NTFS file system can exceed 4GB.<br>
<font color=red>This error could also spuriously occur when writing .xmdf output for a TUFLOW AD (advection dispersion) simulation with the 2013 version of TUFLOW.  This has been fixed for the 2016 version of TUFLOW.</font>
+
This error could also spuriously occur when writing .xmdf output for a TUFLOW AD (advection dispersion) simulation with the 2013 version of TUFLOW.  This has been fixed for the 2016 version of TUFLOW.
 
|discussion_page=* [[Talk:TUFLOW Message 2429|Discuss Message 2429]]
 
|discussion_page=* [[Talk:TUFLOW Message 2429|Discuss Message 2429]]
 
|link3=''
 
|link3=''

Revision as of 11:04, 22 June 2022

TUFLOW Message
ERROR 2429 - Could not write XMDF scalar data. Check disk space.

Alternate Message
NA

Message Type
ERROR

Description
TUFLOW was unable to write data to the output .xmdf file. The most likely cause for this is that there is insufficient disk space.

Suggestions
Check that the output drive has space available.
Check that the file system in use support the file size. For example, FAT32 file system has a maximum file size limit of 4GB, NTFS file system can exceed 4GB.
This error could also spuriously occur when writing .xmdf output for a TUFLOW AD (advection dispersion) simulation with the 2013 version of TUFLOW. This has been fixed for the 2016 version of TUFLOW.


Up
Go-up.png 2xxx Messages