TUFLOW Message 2492

From Tuflow
Revision as of 19:25, 22 June 2023 by ElizaCollison (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
CHECK 2492 - Duplicated SA boundary name "<>" - applied as separate boundary.

Alternate Message
WARNING 2492 - Duplicated SA boundary name "<>" - treated as single boundary and added selected cells to original boundary polygon.

Message Type
CHECK
WARNING

Description
From the 2023-03-AA Build and onwards, models with duplicated SA boundaries (boundaries using the same name) will be treated separately; as if they were different boundary names with the same hydrograph. Prior to the 2023-03-AA Build, duplicated SA boundaries would be treated as a single boundary and the cells selected by each polygon grouped together.

Suggestions
Check that the duplicated boundary name in the 2d_sa layer and behaviour described above is intended. The old method can be invoked by reverting to the pre-2023 defaults and WARNING 2492 is produced instead of the check message.


Up
Go-up.png 2xxx Messages