Difference between revisions of "TUFLOW Message 2618"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name> |alt_msg=WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name> |ty...")
 
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less).  These factors are applied as a multiplier on the rainfall boundary.  
 
|message_desc=The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less).  These factors are applied as a multiplier on the rainfall boundary.  
 
|suggestions=It is recommended that if no rainfall factor is desired that these are set to 1 for clarity.  A value of 1 has overwritten the specified value of 0.
 
|suggestions=It is recommended that if no rainfall factor is desired that these are set to 1 for clarity.  A value of 1 has overwritten the specified value of 0.
|discussion_page=* [[Talk:TUFLOW Message 2618|Discuss Message 2618]]
+
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_2617|Message 2617]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2619|Message 2619]]
 
 
}}
 
}}

Latest revision as of 09:43, 3 March 2023

TUFLOW Message
WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name>

Alternate Message
WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name>

Message Type
WARNING

Description
The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less). These factors are applied as a multiplier on the rainfall boundary.

Suggestions
It is recommended that if no rainfall factor is desired that these are set to 1 for clarity. A value of 1 has overwritten the specified value of 0.


Up
Go-up.png 2xxx Messages