Difference between revisions of "TUFLOW Message 3027"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 10: | Line 10: | ||
|suggestions=Ensure that all materials that utilise log-law roughness have positive values for mannings n. | |suggestions=Ensure that all materials that utilise log-law roughness have positive values for mannings n. | ||
| − | |||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:15, 3 March 2023
TUFLOW Message
ERROR 3027 - Roughness height specified but nLim less than 0.
Alternate Message
NA
Message Type
ERROR
Description
Materials may use use either fixed mannings, depth-varying mannings, or log-law roughness formulations for bed resistance.
When utilising log-law roughness, a maximum limit for equivalent mannings number is required as the formulation becomes singular at shallow depths.
This limit, provided as the fixed mannings n value in the material data, must be greater than zero.
Suggestions
Ensure that all materials that utilise log-law roughness have positive values for mannings n.
| Up |
|---|
 3xxx Messages
|