Difference between revisions of "TUFLOW Message 3037"

From Tuflow
Jump to navigation Jump to search
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
−
|tuflow_message=ERROR 3037: Cell area factors must be >= 0.0001.
+
|tuflow_message=ERROR 3037 - Cell area factors must be >= 0.0001.
 
<br>  
 
<br>  
−
|alt_msg=None
+
|alt_msg=NA<br>
  
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
−
|message_desc=The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%).  
+
|message_desc=Area factors may be applied to cells to manually increase or decrease their storage.
−
|suggestions=The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings).  It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%.
+
The supplied area factors must be greater than 0.0001.
 +
|suggestions=Review the applied area factors and ensure none are less than 0.0001.
  
−
|discussion_page=* [[Talk:TUFLOW Message 3037|Discuss Message 3037]]
 
−
|link3=''
 
−
|link4=''
 
−
|prelink=[[TUFLOW_Message_3036|Message 3036]]
 
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
−
|nextlink=[[TUFLOW_Message_3038|Message 3038]]
 
 
}}
 
}}

Latest revision as of 10:17, 3 March 2023

TUFLOW Message
ERROR 3037 - Cell area factors must be >= 0.0001.

Alternate Message
NA

Message Type
ERROR

Description
Area factors may be applied to cells to manually increase or decrease their storage. The supplied area factors must be greater than 0.0001.

Suggestions
Review the applied area factors and ensure none are less than 0.0001.


Up
Go-up.png 3xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_3037&oldid=32526"