Difference between revisions of "TUFLOW Message 3037"
Jump to navigation
Jump to search
Teegan.Burke (talk | contribs) (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3037: Cell area factors must be >= 0.0001. <br> |alt_msg=None |type=ERROR |message_desc=The value of specified Storage Reduction...") |
Teegan.Burke (talk | contribs) |
||
| Line 6: | Line 6: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%). | |message_desc=The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%). | ||
| − | |suggestions= | + | |suggestions=The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%. |
|discussion_page=* [[Talk:TUFLOW Message 3037|Discuss Message 3037]] | |discussion_page=* [[Talk:TUFLOW Message 3037|Discuss Message 3037]] | ||
Revision as of 10:21, 20 April 2018
TUFLOW Message
ERROR 3037: Cell area factors must be >= 0.0001.
Alternate Message
None
Message Type
ERROR
Description
The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%).
Suggestions
The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%.
| Up |
|---|
 3xxx Messages
|