Difference between revisions of "WIBU Configure Network Server 2016"

From Tuflow
Jump to navigation Jump to search
Line 24: Line 24:
 
<br>
 
<br>
 
<li>The network licence should now be available.  This can be tested on the server by double clicking on a TUFLOW executable.</li>
 
<li>The network licence should now be available.  This can be tested on the server by double clicking on a TUFLOW executable.</li>
 +
 +
{{Tips Navigation
 +
|uplink=[[Wibu_Dongles| Return to WIBU Licensing Main Page]]
 +
}}

Revision as of 09:13, 18 March 2024

Introduction

This page contains instructions for configuring a network TUFLOW licence. It requires that you have the CodeMeter Runtime kit installed on the server, see installing CodeMeter Runtime Kit 2016.

Method

  1. Open the CodeMeter Control Centre. This can be done via the icon on the taskbar:
    CodeMeter TaskBar.jpg

    Or via the start menu:
    CodeMeter ProgramFiles.jpg
  2. Open the WebAdmin via the button in the lower right.
  3. Codemeter v6.40d control center.JPG
    This can also be access by pointing an internet browser to: [http://localhost:22350/]
    The following CodeMeter webpage will appear.
    Codemeter v6.40d WebAdmin.JPG
  4. Navigate to the Configuration >> Server >> Server Access tab and enable the Network Server checkbox and hit Apply.
  5. Codemeter v6.40d Network Server.JPG
  6. In CodeMeter WebAdmin navigate to the Configuration >> Basic >> Sever Search List tab and enter the server name, computer IP address, or the code: 127.0.0.1 in the Server Search list. Click Add to include the server IP to the list.

  7. CodeMeter WebAdmin.png

  8. The network licence should now be available. This can be tested on the server by double clicking on a TUFLOW executable.
  9. Up
    Go-up.png Return to WIBU Licensing Main Page