Difference between revisions of "XPSWMM Conversion TUFLOW Geometry Control File (TBC)"

From Tuflow
Jump to navigation Jump to search
(Created page with " {{Tips Navigation |uplink= Back to XPSWMM to TUFLOW Conversion Page }}")
 
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
== TUFLOW Geometry Control File (TGC) ==
 +
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains:
 +
:* Information on the size and orientation of the grid;
 +
:* Grid cell codes (whether cells are active or inactive);
 +
:* Bed / ground elevations; and
 +
:* Bed material type or flow resistance value.
 +
<br>
 +
The TGC requires no updates; however, it is recommended to review the TGC before running the simulation to ensure all commands are correct.
 +
<br><br>
 +
  
 
{{Tips Navigation
 
{{Tips Navigation
 
|uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to XPSWMM to TUFLOW Conversion Page]]
 
|uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to XPSWMM to TUFLOW Conversion Page]]
 
}}
 
}}

Latest revision as of 12:15, 15 February 2024

TUFLOW Geometry Control File (TGC)

The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains:

  • Information on the size and orientation of the grid;
  • Grid cell codes (whether cells are active or inactive);
  • Bed / ground elevations; and
  • Bed material type or flow resistance value.


The TGC requires no updates; however, it is recommended to review the TGC before running the simulation to ensure all commands are correct.


Up
Go-up.png Back to XPSWMM to TUFLOW Conversion Page