Difference between revisions of "XPSWMM Conversion TUFLOW Geometry Control File (TBC)"
Jump to navigation
Jump to search
Chris Huxley (talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | == TUFLOW Geometry Control File (TGC) == | |
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains: | The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains: | ||
:* Information on the size and orientation of the grid; | :* Information on the size and orientation of the grid; | ||
Latest revision as of 12:15, 15 February 2024
TUFLOW Geometry Control File (TGC)
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains:
- Information on the size and orientation of the grid;
- Grid cell codes (whether cells are active or inactive);
- Bed / ground elevations; and
- Bed material type or flow resistance value.
The TGC requires no updates; however, it is recommended to review the TGC before running the simulation to ensure all commands are correct.
| Up |
|---|
 Back to XPSWMM to TUFLOW Conversion Page
|