XPSWMM Conversion TUFLOW SWMM Control File (TSCF)

From Tuflow
Revision as of 12:14, 15 February 2024 by Emilie Nielsen (talk | contribs)
Jump to navigation Jump to search

TUFLOW SWMM Control File (TSCF) =

The TUFLOW SWMM Control File (TSCF) is used to control the SWMM input data flow. All 1D SWMM files and commands are referenced in the TUFLOW SWMM Control File.

  1. In Windows File Explorer, navigate to the TUFLOW\model folder and create a new blank text file with the extension .tscf.
  2. Open the TSCF into a Text Editor (Notepad++ is recommended) and add the following commands.
    Read SWMM == ..\swmm\1D2D_Urban_HDR_001.inp  ! 1D SWMM Pipe Network input file
    Read SWMM == ..\swmm\1D2D_Urban_RNF_001.inp  ! 1D SWMM Hydrology input file
    Read SWMM == ..\swmm\swmm_inlet_curves_XP_001.inp  ! 1D SWMM Inlet Curves input file
    Read GIS SWMM Inlet Usage == ..\swmm\swmm_iu_XP_001.gpkg >> inlet_usage  ! 1D SWMM Pipe Network Inlet Usage layer

    <<Video>>


Up
Go-up.png Back to XPSWMM to TUFLOW Conversion Page